It would be so amazing if you have your batting cage in your backyard for playing softball and baseball. You can surely build a batting cage if you possess a vast backyard having a flat area. Here you go with some easy steps that will assist you in building a batting cage.
Flooring and Location
You must make the cage at the smaller space in the event you possess a small yard. 10-12 feet wide is the batting cage’s regular measurements; however, you do not have much space in the event, then you can consider it somewhat smaller. For children, 20-40 feet should be the cage length, and for adults, it needs to be 70-80 feet.
If you make use of a pitching machine mainly, then select a flat location in your backyard. You may also select the box area of the batter to level. It is necessary to mow in the cage’s inner when you lift the net in the event you use a grassy location. The cable suspension system permits you to move the net away if required. So, you can also go with this.
You can also go to a dirt area. But this will be unsteady if it is muddy and wet. It will become a costly affair if you add rubber sports or turf under your batting cage; however, this will be of worth during the rainy season. You can also consider concrete for flooring. If you want to lessen the labor and cost, then you can go with concrete.
Buy Cage Net for Batting
You can easily purchase a ready-made cage net for batting as per the size you desire. Many options are available. If you do not want a premade batting cage net, then you can buy loose net from sports supply stores and change it as per your desire.
Mark Area for Cage
Next, you need to mark the four corners of the cage in the region using the dimensions of the batting cage you bought. Put a stake in these four corners by squaring them.
Select Post Frame
Poles are responsible for the creation of the batting cage’s mainframe. Select materials accordingly if you want them to use for quite a long time and long-lasting in the weather. Next, consider in the event you desire to leave the frame throughout the year or eliminate it during winters. The materials incorporate –
- 3″ square tubing 14 gauge
- Galvanized steel posts
- PVC pipe-schedule 40
- 4×4 wood posts
It is highly suggested to use galvanized steel posts as these are long-lasting and cost-effective. If the batting cages are 10-12 feet high, then the steel posts must be lengthened to approximately 13-15 feet. Home Depot or fence supply stores may perform this task for you. You can also find the poles of the height you require without any extension at a metal or fence supply store.
No specialized instruments are needed by concrete heavy-duty wood posts to cut and develop a stable structure. You also require a 15-16 feet tall 4×4 wood beam in every corner. You need to attach a header board as per the cage’s width. You also must include support beams as wood has the propensity to bow with time.
It will help if you made various U-shaped frames down the cage’s length if you consider using square tubing or PVC. The significant advantage of square tubing and PVC is that you can create the whole framework portable.
Do not forget that only metal and wood are suggested when you install a cable suspension frame. You cannot make use of cable suspension, and it requires including posts down the sides in the event you use other plastic posts or PVC.
Check your corners and measurements twice before you dig holes and set posts. Without the inclusion of header cables, two posts on either end need to hold the net. For more support for wide batting cages, you can also select to include a third pole in every end’s center.
Affix the eyebolts close to the top of every post to cut and extend the posts to be 13-15 feet tall. The cage’s length needs to get faced by one eyebolts’ set, and the other faces the different or opposite end post. You are going to use these to fix wire rope and support the batting cage’s sides.
Now dig four holes that need to be approximately 3 feet deep where you put the stakes in Point 2. Dig a hole in each cage’s center end having identical depth if you include the third pole to every end.
It would help if you sank your poles approximately 3 feet into the ground, securing cement as your metal poles have tension from cables. You can include a sleeve by using a pipe somewhat more massive than the posts and placing it in the cement in the event you desire to remove the net.
Do not try to place the poles without anyone’s help. It is some expert; however, you can do it on your own if you get some hands from your friends.
Before you continue with the cable suspension procedure, you need to take some time and permit the cement to cure. It is possible that you must begin once again if you attempt to fix the cage and wire cables before the complete set of the cement.
Attach Suspension Cables
You are now prepared to fix the steel wire cables and connect the net once your cement has cured. To fix the wire rope from one post to the other opposite long end, make use of steel grips, staining to screw eye and hook, eyebolts. Ensure to learn how you can accurately fix than before starting the procedure if you have not done the installation of steel grips to wire rope ever.
At either end of the wire, make an eye loop and connect it with the one end post’s eye bolt. Next, the task is to run it down the cage’s length to the other post where a hook and screwing eye are fixed.
To include an eye loop and the use of steel grips to shut the wire rope’s end, you need to cut the wire role at a sufficient separation. Fix the wire rope and secure it with the screwing eye and open hook.
Till all the posts are attached with wire rope to the posts across it, repeat the process. By making use of eye hooks that you fixed in Point 4, make a header cable at both ends by attaching a wire rope from one end post to the other.
Before you include a support cable down the batting cage’s center, ensure to tighten the header cable. Run the steel wire rope down the center length to either end of the header cable. Make sure to secure the cable with carabineers and wire grips.
Connect the Net
Using the ropes on the net, you need to connect the batting cage net to every post end. To connect the net’s top sides, make use of extra carabineers in addition to the cables after every 3-5 feet of the net or as required. Iterate this process down the length.
The net cannot be tightly stretched. Please leave the net somewhat loose so that the balls do not bounce back. To staking the net to the ground across the base, make use of tent stakes. This will prevent the balls from rolling away and escaping the net.
Unknot the ropes and eliminate the tent stakes to eliminate the net for ground maintenance. After this, slide the net connected to the carabineers to the frame’s one side. Replace the tent stakes and net after mowing.
It would be best if you considered some things to finish your making of the batting cage. Rubber backstop is the first ting. You can buy it online. It will enhance the durability of the net at the back of the batter. This will save you from anything at the back of the batting cage to get iteratively hit by balls.
If you want to get your batting cage’s complete advantages, then a pitching machine is a necessity. This can lead to good practice in the event you have it.
Use an I-screen to save the pitching machine from hit balls if you already bought it. You can buy these from sports specialty stores or online. You can construct your own if you desire.
Well, now you know how you can make a batting cage in your backyard in a few steps in 2020. You can do your practice as per your way. You can save various resources with some labor and footwork by making your batting cage.